6" LED Amber Lap Lights (Add On)

L.E.D. Amber Lap Lights (Add On)

Our L.E.D. Amber Lap lights are meant to light up the area around you without killing your night vision. The amber color also helps fight flying bugs, as many of them have a hard time hunting in the amber color spectrum. Each kit comes with two 6" amber strips. On our boat we like to put one kit at each fishing station, this ensures enough bug fighting, knot tying light for every one.

Our Premium kit is a stand alone kit that includes a remote and receiver. If you already have one of our premium kits you can simply purchase an add on kit since you will already have a remote with 4 zones. Make sure you store your receiver and remote in dry areas on your boat as they are NOT waterproof.

We sell three versions of our LED kits. Make sure you understand the differences before placing your order.

Basic Kit- A general stand alone install with a manual inline On/Off switch.

Premium Kit- A stand alone install with a dimmer and remote control.

Add on Kit- This kit is meant to be added to an already existing Premium kit. This kit comes with only a receiver for the dimmer. You will use the remote from your original Premium kit to control both Led light kits on different zones of the four zone remote you received with your original premium kit.

These lights use super bright 5050 L.E.D.'s

You will receive the following:

2 x Amber 6" 5050 L.E.D. Strips w/ 9 L.E.D.'s Per strip 

8 x Heat Shrink Connectors

3 x 3 Amp Fuses 

10ft 22 AWG Copper Core Wire

10ft 18 AWG Copper Core Wire

1 x Receiver (Not Waterproof)

1 x Waterproof Fuse Holder

1 x 12" Strips of 3m Fabric Weld Adhesive

1 x 15g Gorilla Glue

Installation Diagram and instructions

Specs:

Lumens                               72Lumens each

 Voltage                               DC 12 Volt

 I.P. Rating                             IP68

 Amp hour                           .35 Amp per Hour

 L.E.D. Type                         5050

 Strip Length                       6 inches each with 9 L.E.D.'S per strip

 L.E.D.'s per foot/Meter   18 per foot/60 per meter

*** All of our LED strips come with a 2 year warranty against manufacturer defects.***

It is the responsibility of the installer to connect the end of the wiring to your battery. We do NOT include a new battery terminal or alligator clip for this purpose. We leave this up to the installer so they can choose the best option for your fishing rig.

To better understand LED Technology and how it can affect your fishing make sure you check out our L.E.D. F.A.Q. section.