Loading... Please wait...

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3

Power Savor Kayak/Canoe Green Fishing L.E.D.'s (Basic)


 Product Description

L.E.D. Kayak/Canoe Fishing Lights (Basic)

These L.E.D. fishing kits are specifically engineered to bring in planktonic life and bait fish; this in turn brings out the game fish.  These lights increase catch ratios to an unbelievable rate.  Up against old tube style lights these have produced a 4 to 1 catch ratio from just feet away. White lights and old tube style lights don’t stand a chance against the latest L.E.D. technology.


Our kit’s are the longest, brightest and most affordable L.E.D. fishing light’s on the market. Each set of L.E.D.’s comes with a 2 year warranty against manufacturer defects. 


Our Kayak/Canoe kits come with High Output 2835 L.E.D.'s.  This kit can be run all night on a simple 12V 12 amp Deer feeder battery. These L.E.D.'s put out 2400 lumens at 2 amps, these lights put out the most light and take the least amount of power of any kit on the market. These lights put out nearly 25% more light then our previous kit all while using 20% less power making these great for small craft or for lighting large areas.


***You will need to create your own mounting system***


Here are some options:


3M Fabric Weld Tape with Gorilla Glue- This system is a long term temporary with a one to two year lifespan on the 3M.  This is by far the easiest method and the supplies can be purchased in our Install Accessories Area.  However, the problem is that most kayaks get beat up too much for this to be a viable option.  This option is better suited to a Canoe or a vessel that isn't moved a lot or transported in a rough manner.


Velcro Strips with Zip Ties and Gorilla Glue- This option is best suited for a removable system.  Use the zip ties every 6 inches (don't cover the lights) or so to make sure the Velcro doesn't start to come loose from the L.E.D.'s. This system works great but it needs to be handled with care.  If you pull on the Velcro it can separate from the boat or the L.E.D.'s and if you store the lights in too tight of a ball you run the risk of breaking the internal joints connecting the lights into a string. This can cause a short.  Make sure if you choose this route you don't wind the L.E.D.'s tighter then 12" in diameter.  This ensure enough room for the internal electrical connections to move about without damage. All the items for this install can be purchased in our Install Accessories Area.


Rubber Mounting Brackets- This method works great for mounting our lights to a fixed item you can screw or nail into.  These mounts can be ordered in our Install Accessories area.


Acrylic backer board- In a pinch you could use an acrylic backer from Home Depot or Lowes to mount our lights to.  Then this board can easily be removed and stowed when the need arises.  This is a great way to make sure your lights don't see unnecessary abuse but it requires you to be able to mount the board to your boat and it requires you to be able to store the 6.5' board while not in use.  Sit on top Kayaks lend themselves well for this. We use 3M with Gorilla Glue or the Rubber Mounts to mount the L.E.D.'s.






We sell three versions of our LED kits. Make sure you understand the differences before placing your order.

Basic Kit- A general stand alone install with a manual inline On/Off switch.

Premium Kit- A stand alone install with a dimmer and remote control.

Add on Kit- This kit is meant to be added to an already existing Premium kit. This kit comes with only a receiver for the dimmer. You will use the remote from your original Premium kit to control both Led light kits on different zones of the four zone remote you received with your original premium kit.



These lights use super bright 2835 L.E.D.'s



You will receive the following:

2 x Green two meter strips 2835 L.E.D. Strips

12 x Heat Shrink Connectors

3 x 3 Amp Fuses 

10ft 22 AWG Copper Core Wire

10ft 18 AWG Copper Core Wire

1 x Waterproof On/Off Switch

1 x Waterproof Fuse Holder


Installation Diagram and instructions



Lumens                                        2400

Length                                         13 Feet, 2 x 6.5' strips

Voltage                                         DC 12 Volt

IP Rating                                       IP68

Amp Hour                                     2

L.E.D. Type                                   2835

L.E.D.'s per Foot/Meter           9 L.E.D.'s/30 L.E.D.'s


*** All of our LED strips come with a 2 year warranty against manufacturer defects.***



It is the responsibility of the installer to connect the end of the wiring to your battery and to create a mounting solution for you boat. We do NOT include a new battery terminal or install solution with this kit.. We leave this up to the installer so they can choose the best option for your fishing rig. We do NOT warranty installs. 


To better understand LED Technology and how it can affect your fishing make sure you check out our L.E.D. F.A.Q. section.


 Product Videos

1st Class Tackle L.E.D. Kayak Fishing Lights 2014 Product Line Up (Promo-4) Canoe Fishing Lights
  • 1st Class Tackle L.E.D. Kayak Fishing Lights 2014 Product Line Up (Promo-4) Canoe Fishing Lights
  • 1st Class Tackle L.E.D. Fishing Lights 2014 Product Line Up (Promo-3) LED Boat Lights

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write review

This product hasn't received any reviews yet. Be the first to review this product!

2.00 LBS
Calculated at checkout
Current Stock:



Connect with us


Click the button below to add the Power Savor Kayak/Canoe Green Fishing L.E.D.'s (Basic) to your wish list.